Zweigle Strength Tester for Yarns, Hanks and Fabrics F 427/3

Download the F 427 product information in other languages: Chinese - German - Spanish - Turkish You'll need the free Acrobat Reader to see this document For more information go to the English version.
F 427/3 Strength Tester for Yarns, Hanks and Fabrics
In its basic form the F 427/3 Strength Tester has since its introduction proved its worth with clients throughout the world. Its various testing programs cover a wide spectrum of options for all strength and elongation tests on yarns, hanks and fabrics. Our testing programs comprise standard procedures world-wide. Measuring capacities extend to 3 kN. Where required it can be supplied with 2 load cells. Ideal as a backup machine for quality control in the production plant, for checking incoming and outgoing deliveries, and for research and development. A wide selection of hardware components are available depending on the purpose for which the tester is to be used: Load cells in the load ranges 3 kN/ 2,5 kN/ 2 kN/ 1 kN/ 0,5 kN/ 0,2 kN/ 0,1 kN and 0,05 kN. Pneumatic and mechanical clamps for yarn, hank (lea test), and fabrics in various forms. Pneumatic control unit with pedals for pneumatic clamps.
F 427/3 Strength Tester equipped with pneumatic clamps for fabric testing
The following Test Programmes (Software Modules) are available: Simple tensile test as basic software module in the F 427, ident.no. 8050/0 DIN 53834 Parts 1/2 Yarns, now EN ISO 2062 DIN 53857 Fabrics, now EN ISO 13934-1 DIN 53858 Grab Test, now EN ISO 13934-2 DIN 53842 Parts 1/2 Knot Strength Test ASTM 1578 Lea Test Optional: Testing elastic properties, Module F 427/50, ident. no. 8440/0 Constant extension limits DIN 53835 Parts 2/3/13 Constant force limits DIN 53835 Part 4 Tear test on textile fabrics, Module F 427/51, ident. no. 8440/1 Tongue tear test DIN 53859 Part 1 Single-rip tear test Part 2 Tongue tear test ISO 13937 Part 4 Single-rip tear test Part 2 Wing-rip tear test Part 3 Seam slippage resistance of fabrics Module F 427/53, ident. no. 8440/3 DIN 53868 Delamination test Module F 427/54, ident. no. 8440/4 DIN 54310 A test log for a simple tensile test is illustrated to demonstrate the simplicity of the concept. As we have a strong textile orientation our monitor display is tailored to the needs of our customers and is very easy to use. The operative needs only to make a few entries in order to start a test with the F 427.
Fig: Test log
With the F 427 it is wrong to say that the wider the choice, the harder it is to decide what to select. You may wish to allow us to make the choice of the various options for you. Just send us samples of the yarns and fabrics that you wish to test and we will provide you with a complete testing outfit. Here are a few examples to whet your appetite: Example 1 F 427 Strength Tester for testing single yarns If the F 427 Strength Tester is to be used solely for testing singles yarns, then we will supply the machine with a load cell appropriate to the strength of the yarns involved. Load cells are available in the range from 0.05 kN to 0.5 kN. The tenacity-related pre-tension of 0.5 cN/tex is pre-selected on the PC and then automatically applied during the test. The load cell is solidly mounted in the F 427 below the bottom clamp. The following clamps are available:
Pneumatic yarn clamps type F 427/30, ident. no. 3779/3 (maximum tolerated test load 20 daN). Clamp jaws with special padding.
Pneumatic clamps with friction curve type F 427/32, ident. no. 7807/0 for singles and plied yarns, cords etc. with specially smooth surface (max. tol. test load 20 daN). (without Fig.)
Pneumatic control unit including foot sensor type F 427/31, ident. no. 3803/2. Adjustable air operating pressure 0 – 6 bar.
Mechanical yarn clamps type F 427/26, ident. no. 37753/3 with special padding for loads up to 50 da/N.
Example 2 F 427 Strength Tester for testing fabrics, skeins and ropes For testing fabrics, a load cell in the range 3 kN / 2.5 kN / 2 kN or 1 kN is fitted to the F 427 Strength Tester appropriate to the breaking strength of the specimen. The initial tension for fabrics is selected according to its weight per square meter. This is entered in the PC of the F 427 and automatically applied during the test. When testing skeins and ropes, the initial tension is selected according to the fineness/denier. The load cell is solidly mounted in the F 427 below the bottom clamp. The following clamps are available:
Pneumatic fabric clamps – flat face, type F 427/29, ident. no. 3802/1, test load up to 2 kN. Specimen width up to 70 mm and max. 8 mm thick.
Pneumatic control unit including foot sensor F 427/31, ident. no. 3803/2 see Example 1.
Mechanical fabric clamps – flat face, type F 427/21, ident. no. 3735/4, test load up to 2 kN. Specimen width up to 70 mm and max. 8 mm thick.
Mechanical fabric clamps – corrugated face, type F 427/22, ident. no. 3735/5, test load up to 3 kN. Specimen width up to 70 mm and 8 mm thick, including free–running ratchet wheel with twelve-point socket ring insert type F 427/23.
Grab clamps for determination of maximum loading of textile fabrics, type F 427/25, ident. no. 3800/2. Dimensions: 25 x 25 and 25 x 50 mm.
Skein clamps (Lea Test) ASTM 1578 standard for determination of skein strength, type F 427/27, ident. no. 3801/22. Pins dia. 28 mm, length 40 mm.
Mechanical rope clamps for heavy plied yarns, cords, ropes etc, type F 427/28, ident. no. 3739/3 (max. tol. test load 3 kN).
Example 3 F 427 Strength Tester for testing yarns, fabrics, skeins and ropes Because of the precision of the results obtained, it is absolutely essential to have two load cells, one for tests on yarns and one for tests on fabrics, skeins or ropes; for example 20 daN for tests on yarns and 3 kN for tests on fabrics, skeins or ropes. The two load cells are solidly mounted in the F 427 below the bottom clamps. The following clamps are available:
Pneumatic yarn clamps for the second load cell, F 427/34, ident. no. 3779/4 (max tol. test load 20 daN).
Mechanical yarn clamps for the second load cell, type F 427/33, ident. no. 3775/4 (max. tol. test load 20 daN).
The pneumatic control unit including foot sensor, type F 427/31 together with fabric clamps etc from the above examples can be used on the 3 kN measuring head. Our testing machines are world leaders in quality. Their designs are intended for the hardest use and they have a long working life. It is only natural that testing machines such as these are rather expensive but the extra cost is very soon recovered. After-sale service: Zweigle operates a worldwide after-sale service program. Many customers have agreed upon service contracts with us to have their Zweigle testing machines checked over once a year. This is very important, especially with respect to the ISO 9000 series of quality standards.

Zweigle Textilprüfmaschinen GmbH & Co. KG, Ferdinand-Lassalle-Str. 54, D-72770 Reutlingen/Germany Tel.: +49-(0)7121-9536-0, FAX +49-(0)7121-509325, e-mail: sales@zweigle.com